Windows ME Dial-Up Instructions

  Junctionbox > Support > Dial Up Technical Information > Windows ME Dial-Up Info.

First, is Dial-Up Networking Installed?

1. Click on the Start Button, then choose Settings then choose Dial Up Networking.
2. If you don't see it, Install Dial-Up Networking

Installing Dial-Up Networking

1. Double-click on My Computer (on your desktop), then double-click on Control Panel, then double-click on Add/Remove Programs
2. In the Add/Remove Programs window, click on the Windows Setup tab
3. You will see a list of Windows components, in that list double-click on Communication
4. Click (check) the box next to Dial-Up Networking
5. Click OK twice. and have your Windows CD ready.
6. Once windows is finished installing Dial-Up networking, make a new Dial-Up Networking Connection

Make New Connection under Dial-Up Networking

1. lick on Start, then Settings, then Dial-Up Networking.
2. Double-click on Make New Connection, then choose Next
   
   
   
3. Enter Junctionbox as the name. Select your Modem,
   then click Next.
   
   
   
   
   
4. Click on Finish.
   
   
   
5. Now continue with the following...

Do-It-Yourself (DUN Properties)

1. You should be looking at the Dial Up Networking window with an Junctionbox connection icon in it. RIGHT-click on the Junctionbox icon and select Properties.
   Junctionbox connection Properties window
   
   
   
2. Click on the Networking tab.
   Make sure the settings look like the ones below.
   
   
   
3. Click on the TCP/IP Settings tab and enter these addresses.
   
   
   

Connecting to Junctionbox

Double-click on the Junctionbox icon and enter your username & password.
Then click Connect

1. Click on Dial Properties
   
   
   
2. Then click on Area Code Rules
   Check Always dial the area code (10-digit dialing).